fosroc chemical

Product Details:

Auracast 405 is a high performance super plasticizer suitable for precast concrete industry to obtain high early strength and moderate workability retentions are required.

Product Details:

Fosroc Patchroc GP is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent repair mortar. It is based on portland cements, graded aggregates, and chemical additives providing a mortar woth good handling characteristics while minimisingwaterdemand. The low water requirement ensures good strength gain and loang term durability.

Product Details:

Fosroc Conbextra HS is a dual shrinkage compensated, high flow cementitious grout used grouting applications where rapid strength gain and high ultimate strength is a pre-requisite. Compressive Strength of 26 MPa @ 8hours and 95 MPa @28days when mixed at flowable consistency.

Product Details:

Fosroc Nitocote SN502 is a single-component penetrating silane-siloxane system, which significantly reduces the absorption of water and water borne salts, whilst allowing the passage of water vapour out from the substrate.

Product Details:

Our valuable clients can avail from us premium quality Epoxy Flooring Nitoflor. Furthermore, we offering it in leak proof packaging in order to safe delivery of this product.

Product Details:

Fosroc Reebol chemical mould release agent is a specially formulated blend of mineral oils and selected additives. It is supplied as a low viscosity, pale straw coloured liquid. This extends the life of the surface and reduces the frequency of concrete defects caused by damage to the mould face.

Product Details:

Brushbond comprises a two component acrylic polymer modified cementitious coating supplied in ready to mix kits. Brushbond can be simply applied by stiff brush, roller, spray or trowel to obtain the desired texture.

Product Details:

Fosroc Nitocote EP410 is a highly chemical resistant, high build, solvent free, two pack epoxy coating for concrete and steel. Nitocote EP410 is grey in colour.

Product Details:

The Dekguard Elastic System Comprises a single component penetrating silane-siloxane primer and a single component elastomeric pigmented coating, both ready for immediate site use.The film-forming, stabilising primer is supplied as a clear liquid and is based on an acrylic resin and  a silanesiloxane dissolved in a penetrating organic carrier. The primer is reactive and capable of producing a chemically-bound hydrophobic barrier, thus inhibiting the passage of water and water-borne contaminants. A thin surface film is produced which consolidatesand stabilises porous substrates.

Product Details:

Spray-applied, trowel finished, high build, chemical and abrasion resistant epoxy liner system, 2mm to 5mm thickness.

Product Details:

Fosroc Dekguard E2000 is a crack-accommodating elastomeric protective coating for reinforced concrete and masonry structures. Designed to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen and water, especially where there is a danger of subsequent cracks appearing within the substrate.