Waterproofing Chemicals

Product Details:

Synthryic rubber emulsion to improve the workability,strength and adhesion of cementitious mortar and concrete.

Product Details:

APP modified bituminous membrane sheet Manufactured by sika india pvt ltd.it is availablke in 3mm and 4mm

Product Details:

Sika Noleek TM is an integral waterproofing admixture in powder form for concrete and mortar admixture.

Additional Information:

• Packaging Details: 1 kg x 25

Product Details:

Sikalastic® -450 is a one part, easy to apply, specially formulated polyurethane based, elastic, crack bridging membrane. It cures to form a highly elastic, seamless, waterproof coating with excellent crack bridging properties. Its performance is maintained even at low temperatures.

Product Details:

SikaTop® Seal 109 hi is an elastic liquid applied, crack bridging 2 pack acrylic polymer modified cementitious waterproofing coating system.

Product Details:

Sikalastic 450(I) is a single component, elastomeric, aliphatic polyurethane based cold liquid applied, high build, waterproof coating system. It cures to form an elastic, seamless, waterproof coating with good crack-bridging properties.

Product Details:

Sika® Latex Power is a synthetic rubber emulsion which when added to cement slurry/ cement mortar/concrete/grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of mortar/concrete/ cementitious grout.

We are the Leading suppliers and distributor for sika products in Tamilnadu.

Product Details:

Liquid curing Compound for preventing water loss in concrete.Antisol E is sprayed onto newly laid concrete surfaces to form a thin firm barrier against premature water loss.

Product Details:

A ready to use, liquid curing compound based on paraffin and also White Pigmented to substantially increase light reflectance to effectively prevent premature water loss from the concrete both due to heat of hydration and sunlight.

Product Details:

We are the most trusted name amongst the topmost companies in this business, instrumental in presenting Quick Setting Chemical.

Price Range:

• Rs.30 - Rs.65/ litre

Other information:

• Fosroc brush bond FRX
• Mfg date: February 2016

Product Details:

SikaLatex® Power is a synthetic rubber emulsion which when added to cement slurry/ cement mortar/concrete/grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of mortar/concrete/ cementitious grout.

Product Details:

Brushcrete is a single component acrylic based polymer when blended with cement forms a composite polymer modified cementitious waterproofing system, when used in conjunction with fibre mesh forms a tough hard wearing surface.

 We are the Leading suppliers and distribitors for fosroc products in Tamilnadu.

Product Details:

Nitoproof 600 is a single component pitch modified liquid polyurethane. It cures by reaction with atmospheric moisture to form a tough elastomeric waterproof membrane. Nitoproof 600 is designed for use on horizontal and vertical surfaces. Where Nitoproof 600 is to be exposed to UV light, it should be overcoated with Nitoproof Reflectacoat, an oil based coating containing high-grade leafing aluminium which ensures maximum reflective properties

Product Details:

We are an authorized supplier of a wide range of Anabond Sealant in Hyderabad, Telangana, India. POLYSULPHIDE SEALANT is a one component, gun applied, synthetic rubber based sealant which cures by absorption of atmospheric moisture to form a permanently flexible seal.

Product Details:

Sika® latex power is a synthetic rubber emulsion which when added to cement slurry/ cement mortar/concrete/grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of mortar/concrete/ cementitious grout.

Product Details:

Nitobond SBR is modifi ed styrene butadiene rubber emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too

Product Details:

Features:

• Resin based,aluminised concrete curing compound.
• Water based paraffin wax emulsion white pigmented curing compound.

Product Details:

Sika® Polysulphide is a cross linking polysulphide based elastic sealant for vertical and horizontal expansion joints.

Product Details:

Sika® Multigard is a solvent free, water based, 2-comp. Epoxy protective coating. It provides long lasting protection for wall against damp patches.

Product Details:

Structural bonding agent between old and new concrete.

Epoxy based two component structural bonding agent.

Product Details:

Sikagard-67 is a water based, solvent free, odourless, epoxy resin protective coating.

Additional Information:

• Packaging Details: Part A: 2 kg x 2 containers Part B: 2 kg x 2 containers Part A+B: 4 kg x 2 ready to use units

Product Details:

The use of curing membranes on internal floor slabs is generally to be avoided where additional surface fi nishes are to be applied. Concure WB is however ideal where the concrete surface of a fl oor slab is to be left as ‘fi nished’

Product Details:

Sika Rustoff 100 is a single component liquid that removes rust and prevents further rusting of steel structures.

Product Details:

Sika® rustop is cement bound synthetic resin modified 2-component coating for corrosion protection on reinforcement and concrete. Ideally suited to rehabilitate corroded reinforcement.

Product Details:

Sikadur 32 LP is a solvent - free, two component bonding agent, based on selected epoxy resins. Complies with ASTM C 881-78 type II, Grade 2 class B+C. Sikadur 32 LP provides a bond of far greater strength than the tensile strength of the concrete itself.

Product Details:

Sikadur-32 LP is a solvent-free, two component bonding agent, based on selected epoxy resins. Complies with ASTM C 881-78 type II, Grade 2 Class B+C.

Product Details:

Sika Top Armatec 108 is Easy to use. Excellent adhesion to steel. Good bonding coat for subsequent cement and epoxy based repair mortar. Good barrier effect against water, Chlorides and CO2. Contains corrosion inhibitors. Non-inflammable.

Product Details:

Specially formulated unique pink coloured liquid integral water proofing compound for concrete, mortar and plaster based on Sika’s technology of special selective polymers , surface active agents and additives

Product Details:

A ready to use water resistant white cement base putty for indoor and outdoor plastered surfaces.

Product Details:

Sika® Cracksil Arylic Paste is a single pack, acrylic based, ready to use putty for filling the cracks on internal and external plastered surfaces

Product Details:

Concure WB is a white, low viscosity wax emulsion which incorporates a special alkali reactive emulsion breaking system. This system ensures that the emulsion breaks down to form a non penetrating continuous film immediately upon contact with a cementitious surface. This impervious film prevents excessive water evaporation which in turn permits more efficient cement hydration, thus reducing shrinkage and increasing durability.


 We are the Leading suppliers and distributors for fosroc products in Tamilnadu.

Product Details:

Uses For bonding fresh wet cementitious materials to existing cementitious surfaces. For use on horizontal surfaces or on vertical surfaces where mortar or concrete can be supported by formwork. The long ‘open’ life makes it suitable for use with formwork or where additional steel reinforcement has to be fitted. The product is ideal for roads, bridges, pavements, loading bays and factories, and for bonded or granolithic floor toppings. Nitobond EP is equally suited to internal and external applications.

Advantages Nitobond EP may also be used as part of a repair system where a substrate/repair barrier is required or where the substrate is likely to remain permanently damp or wet. ??? Can be applied on to dry or damp substrates ??? Exhibits high mechanical strength ??? Positive adhesion - exceeds that of the tensile strength of the host concrete ??? Slow cure allows time to erect steel reinforcement and formwork ??? Solvent-free - can be used in enclosed locations

Owing to the wide experience in this domain, we are instrumental in offering anti corrosive epoxy injection grout.

Caution:

• Keep out of reach of children

Available in:

Nito bond EP base resin

Details:

• Part of a 2 component 6 litre pack
• PC: 11411

Nitrobond EP hardener:

Details:

• Hardener component of epoxy resin based bonding agent
• Part of a 2 component 6 litre pack
• PC: 11412

Contains:

• Isophoronediamine: 20-60%
• Poly oxypropylenediamine: 5-20%

Product Details:

Sikadur 42 LP is a three-component, multipurpose,moisture tolerant, epoxy grouting system. For use at temperatures between +20 C and +40 C. Suitable for use in hot and tropical climatic conditions.